Redi-Call USA | Toppo Restaurant Paging System
  • RESTAURANT PAGING Products
  • CHECK HOLDERS
  • LED LIGHTS
  • How To Order
  • BUY NOW

June 26th, 2017

6/26/2017

 

Guest Paging Systems

6/14/2017

 
COASTER PAGING SYSTEMS

Coaster Pagers are ideal for restaurant customers waiting to be seated. Coasters can be programmed to flash, vibrate, beep or otherwise page your customers with any combination of these three signals. Our coasters are foolproof, and can’t be accidentally shut off. Plus, coasters come with an “autolocate” feature, as well as an “out of range” tone.
Picture
​CP-2015
Coaster Pager System, 15 coasters, 1 Charger, 1 Terminal.

CP-2030
​
Coaster Pager System, 30 coasters, 2 Chargers, 1 Terminal.
Picture
TD-2999
Data Page Terminal , UHF, w/ antenna and power supply, 8"w x 8"h x 2"d.
Picture
CP-2000
​
Coaster Pager, vibrates, lights and beeps, any combination. Specify ID numbers desired
(#1, #2, #3, etc.)
Picture
​CC-2000
Coaster Charge w/ ac adapter. Charges up to 15 Coaster Pagers.
PADDLE PAGER SYSTEMS

Paddle Pagers are ideal for restaurant customers waiting to be seated. The Paddle holds advertising messages or paging instructions, and the Paddle's size makes it hard for the customer to put it out of sight in a coat or pants pocket, they will tend to hold it or keep it in plain sight ready to respond to the page immediately. Our Paddle Pagers are foolproof, and can't be shut off. The Transmitter can sit on a counter, or mount on wall using built-in wall-mount bracket. 

PP-2008 - Paddle Pager System with 8 Pagers and charger
PP-2012 - Paddle Pager System with 12 pagers and charger 
Picture
PP-2012 - Paddle Pager System
Picture
Great for golfers waiting to tee off!
Picture
Picture
​Patrons receive pager so they can enjoy the waiting time until called by a tone or vibration.

Staff Paging Systems

6/14/2017

 
DATA PAGE SYSTEM
  • High quality UHF signaling format has a range of up to 2 miles, and it works even in difficult building environments such as within concrete and steel walls.
  • Can handle any number of Pagers up to9,999 without any modifications.
  • Pagers can be set by the user to vibrate (silent operation) or sound a BEEP tone.
  • Numeric messages can be easily sent to the Pagers, for example 222 means go to the kitchen, 444 means go to the bar.
  • Factory can program pager with up to four messages such as "See Manager"
  • "All off" code can be sent to pagers to increase battery life!
  • Our most economical unit, very affordable.
Picture
PD-2012
Picture
TD-2999
Picture
DP-2008
DP-2008 - Data Page System , 8 pagers, 1-Terminal, 1-Pager Tray.
DP-2016 - Data Page System , 16 pagers, 1-Terminal, 2-Pager Trays.
PD-2012 - Pager & Holster only, AAA-battery. When ordering additional Pagers, a Pager Tray is included with each 8-Pagers ordered.
SCD-2012 - Safety Cord for PD-2012, optional item.
TD-2999 - Data Page Terminal , antenna and AC Adapter. For wall mount order TD-WMB bracket below & specify "wall mount".
TD-KB - Keyboard Grease Cover for TD-2999, optional item.
TD-WMB - Wall Mount Bracket for TD-2999, optional item.
WAITER CALL 14 SYSTEM
  • ​Waiter Call 14 is a 14-Station Transmitter that signals the PD-2012 Pagers with either a single, double or triple page at the touch of a button.
  • The moisture resistant surface has a write-on & wipe-off area to enter numbers or names for each station with grease pencil supplied.
  • Order any number of Pagers to suit your needs up to a maximum of (14).
Picture
WC-1408
WC-1408 - Waiter Call System, 8-Pagers, 1 Transmitter, 1 Pager Tray.
WC-1414 - Waiter Call System, 14-Pagers, 1 Transmitter, 2Pager Trays.
TWC-14 - Waiter Call Transmitter, 14-station, antenna, power supply, grease pencil, sits on counter. For wall mount, order bracket and straight antenna below and specify: "wall mount".
TWC-WB - Wall Mount Bracket for TWC-14 or Data Track.
TWC-AV - Antenna Straight for Wall Mount of TWC-14.
TWC-A9 - Antenna 90-degree for TWC-14 Counter Mount (Repl Part).

Food Production Control System, For Fast Food Restaurants

6/14/2017

 
Picture
Now the Store Manager can:
  • Match Food Production to Demand in just seconds.
  • Reduce waste of unsold food or unservable food.
  • Provide customers with the freshest quality of food.
  • Reduce Customer waiting by matching supply to demand.
  • Turns tables faster and increase customer count at peak periods.
​
  • Do you want to reduce customer waiting time?
  • Do you want to serve the freshest, most appealing food, at all hours?
  • Do you want to control food waste?
  • Only Redi-Call's Food Production Control System is up to the task.
​A proven product, with proven value, in use around the world for over 35 years, by market leaders like:  Burger King and Hardee's.
Picture
Picture
Manager selects desired production level.
Picture
Number Panel visible to entire cooking staff, displays production level.
Picture
Optional Drive-Thru Switch calls manager for assistance without leaving station.
  1. Manager Control Switch Panel
    Mount on wall at eye level in convenient location for manager, 32-ft. cable.
  2. Number Panel
    Mount on wall near ceiling; must be visible by entire cooking staff.
  3. Chime
    Mount next to Number Panel; calls attention to lighting of a new number, 10-ft. cable.
  4. Drive-Thru Control Switch (Optional)
    Mount next to Drive-Thru window so cashier can call manager, 35-ft. cable.
  5. Transformer 
    12-volt, 40-watt unit provides safe, low voltage for system, 10-ft. cable
Picture
Typical Installation Floor Plan ​Fast Food Restaurant
Picture
Model 99 BK Complete System
​How It Works

A visual paging system that allows the restaurant manager to communicate the desired level of output at each cooking station to the kitchen staff. #1 is the lowest level of production, "P" is the peak level or highest level of production. The Drive-Thru Control Switch allows the drive-thru person to call the manager for assistance without leaving the station.
​
A door Chime calls attention to the lighting of a new number. Typically, each cooking station has a chart that lists the minimum quantity in the holding bin. When the minimum is reached (say, 6 small fries for level #4 ), then more product is cooked and placed in the holding box.
MODEL - DESCRIPTION

99 BK - Food Production Control System,  with Drive Thru Switch.
99 BK-1- Food Production Control System, with out  Drive-Thru Switch.
99 BK-INT - Food Production Control System, Int'l (220-v)  with Drive Thru Switch.
99 BK-1 INT - Food Production Control System, Int'l  (220-v)  with out  Drive - Thru Switch.
7KR-BK - Manager Control Switch Panel only,  lighted rocker switch, wall-mount, 10.5" x 3" x 3".
99 BK-NP - Number Panel only, quick-connect cable, wall-mount, 24" x 3" x 3".
99 BK-DT - Drive-Thru Control Switch only, w/ 35-ft. cable, 4.5" x 3" x 2".
CH100 - Chime only, w/10-ft. cable, 7" x 5" x 2".
40W - Transformer, 12V, 40-Watt, 110V input, 10-ft. cable.
150W-INT - Transformer, 12V, 150-Watt, 220V input, 10-ft. cable.

Special & Custom Hard Wired Paging Systems

6/14/2017

 
In addition to our standard Hard-Wired Paging Systems shown on another page, we also make Special Hard-Wired Paging Systems for Social Security Offices and for many other applications as well.

All of our Hard-Wired Paging Systems run on safe, low voltage and are built using the highest quality components for years of trouble-free operation. 

Call or write us with your special requirements; we will be happy to give you a quotation.

For Social Security Offices
Picture
Are claimants waiting too long for service?
Picture
Social Security Administration
Picture
Do Claim Reps have trouble communicating with your receptionist regarding their appointments?

​We have four Social Security Office Calling Systems available as follows:
(or we can design a custom system to suit your needs)
Click here to see diagrams, 
operation explanations and cost
​1) CLAIM REP INTERVIEW CALLING SYSTEM
2) INTERVIEW WAITING & CLAIM REP CALLING SYSTEM
3) APPOINTMENT NOTIFICATION SYSTEM
4) AVAILABILITY NOTIFICATION SYSTEM
Custom Hard-Wired Systems
​
We can make systems for pharmacies, offices, banks, and many other applications.
The following are some examples of special systems we have built. 
Please give our customer service department a call to discuss your needs.
Picture
Picture
Picture

Hard-Wired Packaged Paging Systems

6/14/2017

 
The Original "Redi-Call" Paging Systems

An Economical & Reliable Solution for Chef to Wait-Staff Paging

PACKAGED PAGING SYSTEMS

These easy to order systems give you everything you need for a basic five or ten station paging system. These systems are "value priced" so no substitutions are allowed; however you can order additional components to add to the system if desired.

PPS-5 Components
5KR
Picture
           H5
Picture
40W
Picture
CH100
Picture
​PPS-5 Packaged Paging System,
5-station #1-5, incl. (1) ea:
5KR Switch Panel; H5 (or V5) No. Panel; 40-ft #15CSL Output Cable,
​40W Transformer & CH100 Chime.

PPS-10 Packaged Paging System,
10-station #1-10, incl. (1) ea:
10KR Switch Panel; H10 (or V10) Number Panel; 40-ft #110CSL Output Cable; 40W Transformer & CH100 Chime.
Picture
HARD-WIRED REDI-CALL SYSTEMS

These systems are offered in models with 5-lights to 50-lights and even more on custom systems. Each switch & light corresponds to a wait-staff server, so order the size system that will accommodate the maximum number of servers on duty at any one time. A Switch Panel goes in the kitchen for the chef, the Number Panels go in the dining room for the servers to see, and a cable must be run from the Switch Panel to the Number Panel.
Order one each of these for a "basic" Redi-Call System:
  1. Switch Panel
  2. Number Panel
  3. Output Cable (by the foot)
  4. Transformer, 12-volts
  5. Chime (optional)​
Picture
​These systems run on a safe, low voltage (12 volts); so wires can be run simply inside walls or in drop-ceiling areas. Conduit is not required in most states and countries. Quick-disconnect connectors are provided on all cables for easy & fast hook-up; an electrician is usually not required.

Hard-Wired Toggle Switch Panels

6/14/2017

 
Toggle Switch Panels for the Original "Redi-Call" Paging Systems
KR-Series, Counter or Wall Mount


This series uses toggle switches and can be mounted on a counter, on the pass-through shelf in the kitchen, or on a wall. Includes red LED indicator lights and a chime switch. The cable exits through a slot on the side or the back (hidden wiring).

One switch panel can operate several number panels, but you can't have more than one switch panel in a system. * Optional push button switches may be specified in any of these models
1KR      Switch Panel, 1-station #1 (or any no.), 5" x 3" x 2.5"
5KR     Switch Panel, 5-station, #1-5, 6.75" x 3" x 3"
10KR    Switch Panel, 10-sta, #1-10, 10.5 " x 3" x 3"
20KR   Switch Panel, 20-sta, #1-20, 10.5" x 3" x 6"
30KR   Switch Panel, 30-sta, #1-30, 10.5" x 3" x 9"
40KR   Switch Panel, 40-sta, #1-40, 10.5" x 3" x 12"
50KR   Switch Panel, 50-sta, #1-50, 10.5" x 3" x 15"
Models 5KR, 10KR, and 20KR
Picture
* Optional push button switches may be specified at no additional cost in any of the "KR" models 10KR through 50KR shown above. Model 10KR with push button switches is Model 10-CP1-WM, model 20KR becomes 20CP1-WM, and so on as shown in the CP-Series Wall Mount Page.

HARD WIRED CP-SERIES SWITCH PANELS,
UNDER COUNTER MOUNT

​CP-Series Switch Panels, Under Counter Mount.
This series uses push button switches and dual
panels, one panel for the chef's side and one for the server's side, with a 4-foot "E-Cable" connecting them (longer if desired). Right angle mounting Flange makes it easy to mount under a
shelf or counter, all cables plug into connectors on the back. With these push button switches you can  have multiple switch panels in a system, if desired,  and the lights can be turned on or off at any of the panels. 
Picture
Picture
1CP             Switch Panel, 1-station, dual switching. 5" x 3" x 2.5" 
1CP-1          Switch Panel, 1-sta., single switching. 5" x 3" x 2.5" 
10CP          Switch Panels, pair, 10-sta. #1-10, 9.5" x 3.25" x 2.5" 
10CP-1       Switch Panel, single, 10-sta. #1-10, 9.5" x 3.25" x 2.5" .
20CP         Switch Panels, pair, 20-sta., #1-20, 19" x 3.25" x 2.5" 
20CP-1      Switch Panel, single, 20-sta.,#1-20, 19" x 3.25" x 2.5".
30CP         Switch Panels, pair, 30-sta., #1-30, 9.5" x 9.75" x 2.5".
30CP-1      Switch Panel, single, 30-sta., #1-30, 9.5" x 9.75" x 2.5".
40CP         Switch Panels, pair, 40-sta., #1-40, 19" x 6.5" x 2.5". 
40CP-1      Switch Panel, single, 40-sta.,#1-40, 19" x 6.5" x 2.5".

Hard-Wired Number Panels, Wall-Mount

6/14/2017

 
Wall-Mount Number Panels for the Original "Redi-Call" Paging System
Wall-Mount, Single-Sided Number Panels

All number panels have 2" high characters visible up to 75-feet, and are lit by #53 Lamps (12v, 1.5-watt, bayonet) that are easy to replace by sliding the Lens to uncover the desired Lamp. Custom Lenses available for special number or letter sequences. Call for quote. Cables "plug-in" using connectors, no wiring required and no electrician needed. Cables can exit through the top for surface wiring, or out the back for concealed wiring.

H5 - Number Panel, 5-sta. horiz. #1-5, 3" x 12" x 3"
V5 - Number Panel, 5-sta. vert. #1-5, 3" x 12" x 3"
H10 - Number Panel, 10-sta. horiz. #1-10, 3" x 24" x 3"
V10 - Number Panel, 10-sta. vert. #1-10, 3" x 24" x 3"
H15 - Number Panel, 15-sta. horiz #1-15, 9" x 12" x 3"
V15 - Number Panel, 15-sta. vert. #1-15, 9" x 12" x 3"
H20 - Number Panel, 20-sta. horiz. #1-20, 6" x 24" x 3"
V20 - Number Panel, 20-sta. vert. #1-20, 6" x 24" x 3"
H30 - Number Panel, 30-sta. horiz. #1-30, 9" x 24" x 3"
H40 - Number Panel, 40-sta. horiz. #1-40, 12" x 24" x 3"
H50 - Number Panel, 50-sta. horiz. #1-50, 15" x 24" x 3"
H5
Picture
H10
Picture
H15
Picture
H20
Picture
​Wall-Mount, Double-Sided Number Panels

Vertically oriented panel has numbers on both sides; makes for better visibility and easier mounting in some room situations.

W55DF - Number Panel, 5-sta, #1-5, vert, 3" x 12" x 3"
W1010DF - Number Panel, 10-sta, #1-10, vert, 3" x 24" x 3"
W1515DF - Number Panel, 15-sta, #1-15, vert, 9" x 12" x 3"
W 2020DF - Number Panel, 20-sta, #1-20, vert, 6" x 24" x 3"
W55DF
Picture
​W1010DF
Picture
W1515DF
Picture
W2020DF
Picture

Hard-Wired Number Panels, Ceiling Mount

6/14/2017

 
Ceiling-Mount Number Panels for the Original "Redi-Call" Paging System
Ceiling-Mount, Double-Sided Number Panels

​
Mounts to ceiling with convenient canopy box provided. Units are double sided for excellent visibility in nearly all directions.

C55 - Number Panel, 5-station, #1-5, 3" x 12" x 3"
C1010 - Number Panel, 10-sta, #1-10, 3" x 24" x 3"
C1515 - Number Panel, 15-sta, #1-15, 9" x 12" x 3"
C2020 - Number Panel, 20-sta, #1-20, 6" x 24" x 3"
C3030 - Number Panel, 30-sta, #1-30, 9" x 24" x 3"
C4040 - Number Panel, 40-sta, #1-40, 12" x 24" x 3"
C5050 - Number Panel, 50-sta, #1-50, 15" x 24" x 3"
C55
Picture
C1010
Picture
C1515
Picture
​C2020
Picture

Chimes, Transformers and Output Cable

6/13/2017

 
Chime, "Optional"
This optional unit is a two-tone door chime that mounts near any Number Panel to pleasantly call attention to the lighting of a number and is operated by the push button chime switch on any Switch Panel. Has a 10-ft. cable to plug in to the nearest Number Panel.

CH100 - Chime, two-tone, wall-mount 10-ft. cable connects to Number Panel, 7" x 5" x 2".

Transformers
All systems are powered by a UL Approved low-voltage Transformer (12-volts) so that the system is safe, no shock hazard, and so that cables may be easily run along base boards, through walls, and in drop-ceiling areas without the use of expensive electrical conduit (most jurisdictions). Transformers have a replaceable fuse to protect the system in case of an electrical "short."

To determine the proper size Transformer required, simply multiply the number of Number Panel lamps in the system by 1.6, this is the "watts required". If the watts required is less than 40 select the 40W Transformer, if more than 40 select the 150W Transformer.

40W - Transformer, 40-watt, 12-volts, w/ fuse & 10-ft. cable, plugs directly into any 110-volt outlet.
150W - Transformer, 150-watt, 12-volt, w/ fuse & 10-ft. cable, & 6-ft. cord for 110-volt outlet.
150W-INT - Transformer, 150-watt, 12-volt, w/ fuse & 10-ft. cable, & 6-ft. cord for 220-volt outlet (International).


Picture
Output Cables
Output Cable connects the Switch Panel to the Number Panel, or connects two Number Panels together ("daisy chain"). Cables have connectors at both ends for easy hook-up, no electrician required. When measuring for Output Cable to be sure to allow for routing up and down the walls, over the ceiling, and around any obstacles. Order the proper model cable for the number of stations (switches) on the Switch Panel. For example: A #10KR Switch Panel has (10) switches (ten stations), so order #110CSL, 10-station Output Cable. Maximum recommended cable length is 200-feet. Order by the foot; order Length & Connector Set for each Cable:

11L - Output Cable, 1-station / 11CS - Connector Set for 11L Cable
15L - Output Cable, 5-station / 15CS - Connector Set for 15L Cable
110L - Output Cable, 10-station / 110CS - Connector Set for 110L Cable
115L - Output Cable, 15-station / 115CS - Connector Set for 115L Cable
120L - Output Cable, 20-station / 120CS - Connector Set for 120L Cable
130L - Output Cable, 30-station / 130CS - Connector Set for 130L Cable
140L - Output Cable, 40-station / 140CS - Connector Set for 140L Cable
150L - Output Cable, 50-station / 150CS - Connector Set for 150L Cable


Picture
Output Cable "Y-Adaptors"
These "Y-Adaptors" provide easy hook-up for all system configurations. Use a "Dual Y-Adaptor" at the Switch Panel if two Number Panels are in opposite directions, keeps Output Cable lengths as short as possible. Use a "Split Y-Adaptor" if the Switch Panel output is being "split" into two different No. Panels. For example, a 10-station Switch Panel, #1-10, can be split to go to two 5-station Number Panels, #1-5 and #6-10. Use a DUAL-NP1 to "daisy chain" from one 10-station Number Panel to another, use (2) for 20-station, etc.
DUAL-1 - Y-Adaptor, Dual Output any 5 or 10-station Switch Panels.
DUAL-2 - Y-Adaptor, Dual Output, for 15/20 PL Switch Panels only.
DUAL-3 - Y-Adaptor, Dual Output, for 20CP/KR Switch Panels only.
SPLIT-1 - Y-Adaptor, Split Output, for 10PL Switch Panels only.
SPLIT-2 - Y-Adaptor, Split Output, for 10CP/KR Switch Panels only.
SPLIT-3 - Y-Adaptor, Split Output, for 15PL Switch Panels only.
SPLIT-4 - Y-Adaptor, Split Output, for 20PL Switch Panels only.
DUAL-NP1 - Y-Adaptor, to "daisy chain" any 10-station Number Panels.


Custom Number Panels
Call our Customer Service Department to discuss your custom requirements, we will be happy to quote you. Custom Lenses of any kind are readily available for any standard Number Panel.

    Order Now

    ​​Vibrating Paging Systems
    GUEST PAGING SYSTEMS

    STAFF PAGING SYSTEMS

    Hard-Wired Paging Systems
    FOOD  PRODUCTION CONTROL  SYSTEM, FOR FAST FOOD RESTAURANTS

    SPECIAL & CUSTOM HARD WIRED PAGING SYSTEMS

    HARD-WIRED PACKAGED PAGING SYSTEMS

    HARD-WIRED TOGGLE SWITCH PANELS,  &
    CP-SERIES SWITCH PANELS


    HARD-WIRED NUMBER PANELS, WALL MOUNT

    HARD-WIRED NUMBER PANELS, CEILING MOUNT

    CHIMES, TRANSFORMERS,
    ​ & OUTPUT CABLES
    Print Catalog

Redi-Call USA is the leading manufacturer of Restaurant Paging Systems

PO Box 1983
Dayton, NV  89403 USA
Telephone: 775-331-0183​​​
sales@redi-callusa.com
​

Ceiling-Mount
Chimes
Counter
Custom Hard Wire Paging Systems
Data Page System
Double-Sided Number Panels
Food Production Control System

Guest Paging Systems
Hard Wired
Hard-wired
Hard-Wired Number Panels
Hard-wired Systems
LED For Restaurants
LED Lighting

Number Panels
Packaged Paging Systems
Paging System
Redi Call
Redi-Call
Redi Call Paging System
Redi-Call Paging System
Single-Sided Number Panels

Special Hard Wired Paging Systems
Staff Paging System
Toggle Switch Panels
Toppo
Transformers
Waiter Call System
Wall Mount
Check Holders​


  • RESTAURANT PAGING Products
  • CHECK HOLDERS
  • LED LIGHTS
  • How To Order
  • BUY NOW